Plug Valve

Plug Valve uses a rotating plug inside the body of a valve to control fluid and gas. These valve have one or more horizontal passageways to allow flow through the valve when open.

 

Various Model :

Elastomer Sleeved Plug Valve

Lift Plug Valve, Non Lubricated Plug Valve
Eccentric Plug Valve, Fully Lined Plug Valve
Lubricated Plug Valve, Expanding Plug Valve

Read More..

Pinch Valve

Pinch valve is a control valve for uses a pinching effect to obstruct fluid flow.

The pinch valve has a full and true bore, to open or close valve with system pneumatic or electric actuator.

 

Benefit & Specification :

Size Range : Up to DN 1.000

Material Body : Cast iron, Carbon & Stainless steel

Material Sleeve : Soft and Hard rubber

Low & easy maintenance, Compact, robust & straight through design

Very fast opening/closing, Self cleaning, No mechanical spare part required

Read More..

Needle Valve

Needle Valve is a type of valve having a small port and a threaded, needle-shaped plunger. It allows precise regulation of flow, although it is generally only capable of relatively low flow rates. The needle valve generally use for high pressure line and for instrument equipment.

 

Specifications :

End Connection : NPT / BSPP / BSPT

Max Pressure : 10.000 PSI at 100°C

Material : 316 SS / 316L SS / 304 SS / Carbon steel

 

 

 

Read More..

Piston Check Valve

Piston Check Valves use a globe valve style body with a piston that works in the vertical direction. There are two types of these valves. Spring loaded and unsprung. Spring loaded piston check valves can operate at any orientation while unsprung valves have to be oriented for gravity closure.

 

Specifications :

Body Material: PVC, Carbon & Stainless Steel

Size Range: 1/2″ through 4″

Pressure Range : Class 150 – 300

End Connection : Socket,, Threaded, Flange

Read More..

Pressure Regulator

Pressure regulator, is a control valve that reduce input pressure of a fluid to a desired value at its output.

Regulator are used for air, water, gas. liquid, and they working with integral device with an output pressure setting, without any other device needed like pressure sensor, controller and flow valve.

 

Application : Water, Air, Gas & Steam

Benefit : Precise pressure regulation, Stable operating pressure, Dynamic system

Available Brand : Spirax Sarco, Gestra, Adca, Armstrong, Carraro Valve

Read More..

Angle Seat Valve

Angle Seat Valve is designed for economical throttling of flow, and is particularly suitable for on off service of clean fluids. Angle Seat Valve design allows for the valve to be installed in both vertical and horizontal.

 

Specification :

Size Range : 3/8″ to 2″

Material : PVC, Bronze, Stainless Steel

Connection : NPT Threaded, Butt Weld, Flanged

Benefit : Integrated pneumatic actuator, Fast valve actuation, Compact assembly

Read More..

Jual Forged Steel Globe Valve

Forged Steel Globe Valve

Forged steel globe valve a compact but extremely sturdy design for high pressure-temperature service.

 

Details Specification :
Design | Testing According : API 602 | API 598
End Connection : Socket Weld, Screwed, Butt Weld & Flange
Ratings Class : 150 – 2500 ( Common Pressure Class #800 )

 

Features :
Y-Pattern, Port or Regular Port, Extended Stem or Below Seal, Welded or Pressure Seal Bonnet, Locking Device.

Read More..

Jual Bellow Seal Gate Valve

Forged Steel Gate Valve

Bellows seal gate valve has always been considered as the safest for aggressive fluids. Where leakage into or out of the valve is unacceptable such as heat transfer oil, toxic fluids, steam and regulated media.

 

General Specification :

Size | Rating : 1/2″ – 12″ |150# – 1500#

Material Body & Bellow : A105N, Stainless Steel, Alloy Steel, Monel

End Connection : Socket Weld, Thread, Flange

 

Features :
Long cycle life bellows, Bolted body-bonnet for fast serviceability
Non-rotating stem, Every bellow assembly is helium leak-tested to assure zero leakage

Read More..